MXL XL L Profile Timing Belts
Positive push belt systems had been very first designed by using a trapezoidal profile, these types of belts are MXL, XL and L. MXL timing belts are created of Polyurethane, strengthened with either Polyester or Kevlar wire or Nylon protected Neoprene, Fiberglass strengthened. Five standard widths are offered and when expected other widths is often Minimize to purchase.
widths: 1/4", 5/16", 3/8", and 1/2". As all our belts, inch timing belts can be cut to non-standard widths to meet your exact needsWhen a standard product won't meet your requirements we can provide alternative solutions through custom design and manufacturing. Our engineering and manufacturing teams will partner with you throughout the entire process.By providing design, development, manufacturing, assembly and testing in one location we can ensure the end product will meet your expectations. We specialize in both small to large production runs.
T Profile Timing Belt
T single-sided and double-sided timing belts are available in pitches 2.5, 5 and 10 mm. Made of polyurethane/rubber and reinforced with strong fiberglass tensile cords they are oil and ozone resistant. Fiberglass tensile cords provide many advantages including, high strength, low elongation, absence of creep and excellent dimensional stability. For a lightweight drive system pair these polyurethane timing belts with either aluminum pulleys or plastic pulleys.
Timing belts for HTD and RPP Profile
HTD and RPP Profile Timing Belts can be necessary for multiple reasons, such as for drives that require a constant speed transfer or for those drives that are required to be as maintenance-free as possible.
They can also be applied for multiple purposes, such as for high precision milling and grinding machines, office machines, household machines，The following product characteristics are expected: long service life, maintenance-free, high level of power transmission and antistatic behaviour in accordance, non-sensitive to external influences such as temperature fluctuations and moisture.
The special tooth form and the use of particularly resistant materials ensure YONGHANG TIMING BELTS these drive requirements without compromis.
Pu Timing belts - endless cast, with cleats and coatings
YONGHANG ALPHA linear and ALPHA V timing belts in the FDA blue version are produced from a PU base material with FDA approval for the direct transport of foodstuffs, and thus expand the wide range of YONGHANG polyurethane timing belts.
The blue timing belt has a hardness of timing belt coated 85 Shore A and is optionally equipped with an aramid or stainless steel tension cord. Profiles T5 and T10 with aramid cord are available from stock. The other profiles listed on the left are manufactured on request.
The thermoplastic polyurethane is eminently suitable for welding on the cleats made of FDA-approved base material. Base material, with a hardness and colours options to match those of the base belt.
In addition, the YONGHANG ALPHA V timing belt can be provided with top surface coatings, which are also made of FDA-approved base material.
About the timing belt installation
In the belt installation system, it is essential which the belt be totally seated during the pulley grooves ahead of implementing last pressure. Serpentine drives with numerous pulleys and drives with significant pulleys are notably liable to belt tensioning difficulties ensuing within the belt teeth currently being only partly engaged in the pulleys for the duration of set up. In order to avoid these challenges, the belt set up rigidity ought to be evenly distributed to all belt spans by rotating the program by hand. Soon after confirming that belt enamel are thoroughly engaged in the pulley grooves, belt tension needs to be rechecked and verified. Failure to do this could cause an beneath tensioned issue Along with the probable for belt ratcheting.
The FHT (Fenner Superior Torque) curvilinear timing belt system provides sleek Procedure and significant torque carrying ability with lower backlash. These mini-pitch synchronous timing belts and pulleys are available in the following pitches: 1 mm, two mm and 3 mm. The miniature pitch was designed in reaction to your rising need to have for more compact belt drives in the present current market area. Precise positioning, silent operation and low vibration, the mini-pitch push program provides decades of issues-cost-free services For lots of programs, including 3D Printers, Pan and Tilt capabilities, Health-related Devices and Vending Devices.
The trapezoidal condition timing belt was superseded by a curvilinear tooth profile. As a result of their superior load carrying capabilities, the curvilinear belts are promoted under the title of YONGHANG HTD drives. This is an abbreviation of Significant Torque Drives.